Solisto ADC-4all 8300 - DAC giá rẻ

General
Case Material	Aluminium, anodised
Dimensions	(W x H x D // mm) 100 x 55 x 24
Weight	200 g
Supply Voltage	6-15 Volt DC
AC Adaptor	6 V DC, 300 mA
Operating Temperature Range	0° - 50° Celsius
System	NXP/Philips UDA1351TS IEC 958 audio decoder with an integrated stereo DAC

Optical Digital Input
Optical Connector	Toslink F05
Max Length of Optical Cable	10 meters, up to 15 meters under very good conditions
Data Link Layer Protocol	IEC 958 (S/PDIF)
Sampling Frequencies	32.0 kHz
44.1 kHz
48.0 kHz
64.0 kHz
88.2 kHz
96.0 kHz

Analogue Stereo Ouput
Audio Connector	3.5 mm (1/8“) stereo plug (TRS)
Output Voltage (RMS value)	900 mV
Total Harmonic Distortion Plus Noise to Signal Ratio (THD + N)	-85 dB
Signal-to-Noise Ratio (SNR) at 1.0 kHz and 48 kHz sample rate	95 dB
Channel Separation (1 kHz)	96 dB

Scope of delivery
Solisto.DAC-4all
AC Adaptor
Toslink cable for connection to the optical-digital output of an audio device. Length: approx. 1.5 meter
Connection cable 2x RCA/cinch to stereo mini-jack . mm // /8 inch for connection to an analogue hi-fi system. Length: approx. 1.5 meters / 60 inch.
User guide in English and German

[I]The Solisto.DAC-4all enables you to connect any device that is equipped with a optical-digital output (Toslink) with the analogue input of a conventional hi-fi system. The Solisto.DAC-4all offers an optical-digital input that can be connected to the audio output of diverse devices such as flatscreen televisions, DVD players, satellite receivers or computers.

One of the biggest issues when connecting such devices are so called ground loops, which add a very annoying hum to the audio signal - but not when you use the Solisto.DAC-4all. A ground loop cannot occur as the Solisto.DAC-4all ensures a galvanic separation of the two audio devices.

We achieved to stick to the grade of quality associated with our Solisto products while offering most competitive pricing. Easily being the most affordable product of its kind on the market, the converter chip is a high-quality product of Philips. In conjunction with the elaborate design and fabrication of the electronics - Made in Germany all the way - this ensures trouble-free sound quality. The Solisto.DAC-4all features the same high-quality aluminium housing, that proved stability and excellent shielding capacity in our Solisto Car Audio products. A blue light in the front indicates that an audio signal is present.

The unique combination of quality and cost efficiency allows for a wide range of possibilities - we are surprised again and again of how diverse the applications are that our customers use the Solisto.DAC-4all for.[/I]