Raspberry Pi + Rune Audio ::: Một trải nghiệm nghe nhạc mới

linh0983

Well-Known Member

COMFAST CF-972AX Chipset: RTL8832CU . :mad:


VBGF04.jpg

Chú này dùng cho PC là ngon các bác ạ . :cool:
 

linh0983

Well-Known Member
Sorry anh, em hướng dẫn build sai thứ tự, nên lệnh mv không đúng. Em ghi thẻ mới, build lại mới thấy sai thứ tự lệnh mv.

Đã cập nhật lại, anh thử xem.


Chạy cài make install xong mà hiện vậy là OK

Mã:
install -p -m 644 8814au.ko  /lib/modules/6.1.58-2-rpi-ARCH/kernel/drivers/net/wireless/
/sbin/depmod -a 6.1.58-2-rpi-ARCH


Hoặc cách khác anh bỏ qua bước #10 và #11, cài tự động với script:
Mã:
sudo ./install-driver.sh
Làm thẻ mới pass cùng lúc 11 dòng : RTL8812AU cài driver thàng công nhưng rAudio 32bit vẫn chưa thấy CF-917 bác Lâm ạ ( mò mẫm cho biết driver chú này khó chịu đến đâu ui ? ) . :D

sudo pacman -Syu (n)
sudo pacman -S linux-rpi-headers
sudo mv -f /usr/lib/modules/6.1.64-2-rpi-ARCH/build /usr/lib/modules/6.1.58-2-rpi-ARCH/
sudo pacman -S base-devel
sudo pacman -S bc
sudo pacman -S git
git clone https://github.com/aircrack-ng/rtl8812au.git
cd rtl8812au
git pull
make
sudo make install

Mã:
   r A u d i o


rAudio:~  #  sudo pacman -Syu
sudo pacman -S linux-rpi-headers
sudo mv -f /usr/lib/modules/6.1.64-2-rpi-ARCH/build /usr/lib/modules/6.1.58-2-rpi-ARCH/
sudo pacman -S base-devel
sudo pacman -S bc
sudo pacman -S git
git clone https://github.com/aircrack-ng/rtl8812au.git
cd rtl8812au
git pull
make
sudo make install
:: Synchronizing package databases...
 +R is up to date
 core is up to date
 extra                                                         8.9 MiB   621 KiB/s 00:15 [###################################################] 100%
 alarm is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...

Packages (102) archlinux-keyring-20231130-1  avahi-1:0.8+r189+g35bb1ba-1  bash-5.2.021-1  blas-3.12.0-2  c-ares-1.23.0-1
               ca-certificates-mozilla-3.95-1  cblas-3.12.0-2  dhcpcd-10.0.5-1  dialog-1:1.3_20231002-1  ffmpeg-2:6.1-1  firefox-120.0.1-1
               gawk-5.3.0-1  gettext-0.22.4-1  glib2-2.78.1-1  gnupg-2.4.3-2  gnutls-3.8.2-1  gpgme-1.23.2-1  gssproxy-0.9.2-1
               gtk-update-icon-cache-1:4.12.4-1  harfbuzz-8.3.0-1  hwdata-0.376-1  iana-etc-20231117-1  imagemagick-7.1.1.22-1  iproute2-6.6.0-2
               iptables-1:1.8.10-1  krb5-1.20.1-2  lapack-3.12.0-2  libass-0.17.1-2  libcap-2.69-3  libcloudproviders-0.3.5-1  libdrm-2.4.118-1
               libelf-0.190-1  libgcrypt-1.10.3-1  libjpeg-turbo-3.0.1-1  libksba-1.6.5-1  libnghttp2-1.58.0-1  libnpupnp-5.1.2-1  libnsl-2.0.1-1
               libp11-kit-0.25.3-1  libpipewire-1:1.0.0-2  libpulse-16.1-7  libsndfile-1.2.2-2  libsoup3-3.4.4-1  libsysprof-capture-45.1-1
               libtiff-4.6.0-2  libunibreak-5.1-1  libunwind-1.7.2-1  libupnpp-0.24.1-1  liburing-2.5-1  libuv-1.47.0-1  libwacom-2.9.0-2
               libwbclient-4.19.3-1  libwebsockets-4.3.3-1  libxml2-2.12.1-1  linux-firmware-20231110.74158e7a-1
               linux-firmware-whence-20231110.74158e7a-1  linux-rpi-6.1.64-2  mkinitcpio-37.1-1  mpd-0.23.14-2  nfs-utils-2.6.4-1
               nfsidmap-2.6.4-1  nftables-1:1.0.9-1  nginx-mainline-1.25.3-1  nss-3.95-1  openssl-3.1.4-1  p11-kit-0.25.3-1  pcsclite-2.0.1-1
               php-8.2.13-1  php-fpm-8.2.13-1  python-3.11.6-1  python-attrs-23.1.0-1  python-charset-normalizer-3.3.2-1
               python-jsonschema-4.20.0-1  python-jsonschema-specifications-2023.11.2-1  python-numpy-1.26.2-1  python-referencing-0.31.1-1
               python-upnpp-0.24.0-1  python-urllib3-1.26.18-1  qt5-base-5.15.11+kde+r147-1  raspberrypi-bootloader-20231129-1
               raspberrypi-utils-20231130-1  readline-8.2.007-1  samba-4.19.3-1  sdl2-2.28.5-1  shadow-4.14.2-1  shairport-sync-4.3.2-1
               shared-mime-info-2.4-1  smbclient-4.19.3-1  sqlite-3.44.2-2  sudo-1.9.15.p2-1  systemd-254.6-2  systemd-libs-254.6-2
               systemd-sysvcompat-254.6-2  upmpdcli-1.8.6-1  util-linux-2.39.2-2  util-linux-libs-2.39.2-2  vulkan-icd-loader-1.3.269-1
               xdg-utils-1.2.0r17+g21fb316-1  xorg-server-21.1.9-1  xorg-server-common-21.1.9-1  xz-5.4.5-1  zlib-1:1.3-2

Total Download Size:    313.56 MiB
Total Installed Size:  1338.16 MiB
Net Upgrade Size:        46.98 MiB

:: Proceed with installation? [Y/n] n
resolving dependencies...
looking for conflicting packages...

Packages (1) linux-rpi-headers-6.1.64-2

Total Download Size:    9.89 MiB
Total Installed Size:  52.54 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 linux-rpi-headers-6.1.64-2-armv7h                                         9.9 MiB  1491 KiB/s 00:07 [#############################################
(1/1) checking keys in keyring                                                                       [#############################################
(1/1) checking package integrity                                                                     [#############################################
(1/1) loading package files                                                                          [#############################################
(1/1) checking for file conflicts                                                                    [#############################################
(1/1) checking available disk space                                                                  [#############################################
:: Processing package changes...
(1/1) installing linux-rpi-headers                                                                   [#############################################
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating module dependencies...
resolving dependencies...
looking for conflicting packages...

Packages (18) autoconf-2.71-4  automake-1.16.5-2  bison-3.8.2-6  debugedit-5.0-5  fakeroot-1.32.2-1  flex-2.6.4-5  gc-8.2.4-1  gcc-12.1.0-2.1  grof
              guile-3.0.9-1  libisl-0.26-1  libmpc-1.3.1-1  m4-1.4.19-3  make-4.4.1-2  patch-2.7.6-10  pkgconf-2.0.3-1  texinfo-7.1-2  base-devel-1

Total Download Size:    44.00 MiB
Total Installed Size:  208.53 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 gcc-12.1.0-2.1-armv7h                                                    28.8 MiB   487 KiB/s 01:01 [#############################################
 guile-3.0.9-1-armv7h                                                      6.9 MiB   377 KiB/s 00:00 [############################################# guile-3.0.9-1-armv7h                                          7.0 MiB   276 KiB/s 00:26 [###################################################] 100% groff-1.23.0-5-armv7h                                         2.0 MiB   568 KiB/s 00:04 [###################################################] 100%
 texinfo-7.1-2-armv7h                                       1601.4 KiB   330 KiB/s 00:05 [###################################################] 100%
 libisl-0.26-1-armv7h                                       1186.2 KiB   306 KiB/s 00:04 [###################################################] 100%
 bison-3.8.2-6-armv7h                                        716.8 KiB   276 KiB/s 00:03 [###################################################] 100%
 autoconf-2.71-4-any                                         638.6 KiB   246 KiB/s 00:03 [###################################################] 100%
 automake-1.16.5-2-any                                       606.5 KiB   237 KiB/s 00:03 [###################################################] 100%
 make-4.4.1-2-armv7h                                         474.2 KiB   256 KiB/s 00:02 [###################################################] 100%
 flex-2.6.4-5-armv7h                                         281.3 KiB   180 KiB/s 00:02 [###################################################] 100%
 m4-1.4.19-3-armv7h                                          228.0 KiB  73.8 KiB/s 00:03 [###################################################] 100%
 gc-8.2.4-1-armv7h                                           214.4 KiB  83.1 KiB/s 00:03 [###################################################] 100%
 patch-2.7.6-10-armv7h                                        92.9 KiB  90.2 KiB/s 00:01 [###################################################] 100%
 fakeroot-1.32.2-1-armv7h                                     73.4 KiB  96.6 KiB/s 00:01 [###################################################] 100%
 libmpc-1.3.1-1-armv7h                                        73.0 KiB  57.5 KiB/s 00:01 [###################################################] 100%
 pkgconf-2.0.3-1-armv7h                                       53.9 KiB  53.4 KiB/s 00:01 [###################################################] 100%
 debugedit-5.0-5-armv7h                                       40.7 KiB  40.3 KiB/s 00:01 [###################################################] 100%
 base-devel-1-1-any                                            2.0 KiB  3.98 KiB/s 00:01 [###################################################] 100%
 Total (18/18)                                                44.0 MiB   357 KiB/s 02:06 [###################################################] 100%
(18/18) checking keys in keyring                                                         [###################################################] 100%
(18/18) checking package integrity                                                       [###################################################] 100%
(18/18) loading package files                                                            [###################################################] 100%
(18/18) checking for file conflicts                                                      [###################################################] 100%
(18/18) checking available disk space                                                    [###################################################] 100%
:: Processing package changes...
( 1/18) installing m4                                                                    [###################################################] 100%
( 2/18) installing autoconf                                                              [###################################################] 100%
( 3/18) installing automake                                                              [###################################################] 100%
( 4/18) installing bison                                                                 [###################################################] 100%
( 5/18) installing debugedit                                                             [###################################################] 100%
( 6/18) installing fakeroot                                                              [###################################################] 100%
( 7/18) installing flex                                                                  [###################################################] 100%
( 8/18) installing libmpc                                                                [###################################################] 100%
( 9/18) installing libisl                                                                [###################################################] 100%
(10/18) installing gcc                                                                   [###################################################] 100%
(11/18) installing groff                                                                 [###################################################] 100%
Optional dependencies for groff
    netpbm: for use together with man -H command interaction in browsers
    psutils: for use together with man -H command interaction in browsers
    libxaw: for gxditview
    perl-file-homedir: for use with glilypond
(12/18) installing gc                                                                    [###################################################] 100%
(13/18) installing guile                                                                 [###################################################] 100%
(14/18) installing make                                                                  [###################################################] 100%
(15/18) installing patch                                                                 [###################################################] 100%
Optional dependencies for patch
    ed: for patch -e functionality
(16/18) installing pkgconf                                                               [###################################################] 100%
(17/18) installing texinfo                                                               [###################################################] 100%
Optional dependencies for texinfo
    perl-archive-zip: EPUB file output via texi2any
(18/18) installing base-devel                                                            [###################################################] 100%
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating the info directory file...
resolving dependencies...
looking for conflicting packages...

Packages (1) bc-1.07.1-4

Total Download Size:   0.08 MiB
Total Installed Size:  0.15 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 bc-1.07.1-4-armv7h                                           78.4 KiB  49.6 KiB/s 00:02 [###################################################] 100%
(1/1) checking keys in keyring                                                           [###################################################] 100%
(1/1) checking package integrity                                                         [###################################################] 100%
(1/1) loading package files                                                              [###################################################] 100%
(1/1) checking for file conflicts                                                        [###################################################] 100%
(1/1) checking available disk space                                                      [###################################################] 100%
:: Processing package changes...
(1/1) installing bc                                                                      [###################################################] 100%
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating the info directory file...
resolving dependencies...
looking for conflicting packages...

Packages (4) perl-error-0.17029-5  perl-mailtools-2.21-7  perl-timedate-2.33-5  git-2.43.0-1

Total Download Size:    6.09 MiB
Total Installed Size:  37.72 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 git-2.43.0-1-armv7h                                           6.0 MiB   298 KiB/s 00:21 [###################################################] 100%
 perl-mailtools-2.21-7-any                                    58.5 KiB  46.1 KiB/s 00:01 [###################################################] 100%
 perl-timedate-2.33-5-any                                     32.9 KiB  43.3 KiB/s 00:01 [###################################################] 100%
 perl-error-0.17029-5-any                                     21.0 KiB  40.4 KiB/s 00:01 [###################################################] 100%
 Total (4/4)                                                   6.1 MiB   258 KiB/s 00:24 [###################################################] 100%
(4/4) checking keys in keyring                                                           [###################################################] 100%
(4/4) checking package integrity                                                         [###################################################] 100%
(4/4) loading package files                                                              [###################################################] 100%
(4/4) checking for file conflicts                                                        [###################################################] 100%
(4/4) checking available disk space                                                      [###################################################] 100%
:: Processing package changes...
(1/4) installing perl-error                                                              [###################################################] 100%
(2/4) installing perl-timedate                                                           [###################################################] 100%
(3/4) installing perl-mailtools                                                          [###################################################] 100%
(4/4) installing git                                                                     [###################################################] 100%
Optional dependencies for git
    tk: gitk and git gui
    openssh: ssh transport and crypto [installed]
    perl-libwww: git svn
    perl-term-readkey: git svn and interactive.singlekey setting
    perl-io-socket-ssl: git send-email TLS support [installed]
    perl-authen-sasl: git send-email TLS support
    perl-mediawiki-api: git mediawiki support
    perl-datetime-format-iso8601: git mediawiki support
    perl-lwp-protocol-https: git mediawiki https support
    perl-cgi: gitweb (web interface) support
    python: git svn & git p4 [installed]
    subversion: git svn
    org.freedesktop.secrets: keyring credential helper
    libsecret: libsecret credential helper [installed]
:: Running post-transaction hooks...
(1/4) Creating system user accounts...
Creating group 'git' with GID 961.
Creating user 'git' (git daemon user) with UID 961 and GID 961.
(2/4) Reloading system manager configuration...
(3/4) Arming ConditionNeedsUpdate...
(4/4) Warn about old perl modules
Cloning into 'rtl8812au'...
remote: Enumerating objects: 11222, done.
remote: Counting objects: 100% (1116/1116), done.
remote: Compressing objects: 100% (675/675), done.
remote: Total 11222 (delta 525), reused 893 (delta 422), pack-reused 10106
Receiving objects: 100% (11222/11222), 71.89 MiB | 1.99 MiB/s, done.
Resolving deltas: 100% (7493/7493), done.
Updating files: 100% (578/578), done.
Already up to date.
make ARCH=arm CROSS_COMPILE= -C /lib/modules/6.1.58-2-rpi-ARCH/build M=/root/rtl8812au  modules
warning: the compiler differs from the one used to build the kernel
  The kernel was built by: armv7l-unknown-linux-gnueabihf-gcc (GCC) 12.1.0
  You are using:           gcc (GCC) 12.1.0
  CC [M]  /root/rtl8812au/core/rtw_cmd.o
  CC [M]  /root/rtl8812au/core/rtw_security.o
  CC [M]  /root/rtl8812au/core/rtw_debug.o
  CC [M]  /root/rtl8812au/core/rtw_io.o
  CC [M]  /root/rtl8812au/core/rtw_ioctl_query.o
  CC [M]  /root/rtl8812au/core/rtw_ioctl_set.o
  CC [M]  /root/rtl8812au/core/rtw_ieee80211.o
  CC [M]  /root/rtl8812au/core/rtw_mlme.o
  CC [M]  /root/rtl8812au/core/rtw_mlme_ext.o
  CC [M]  /root/rtl8812au/core/rtw_mi.o
  CC [M]  /root/rtl8812au/core/rtw_wlan_util.o
  CC [M]  /root/rtl8812au/core/rtw_vht.o
  CC [M]  /root/rtl8812au/core/rtw_pwrctrl.o
  CC [M]  /root/rtl8812au/core/rtw_rf.o
  CC [M]  /root/rtl8812au/core/rtw_chplan.o
  CC [M]  /root/rtl8812au/core/rtw_recv.o
  CC [M]  /root/rtl8812au/core/rtw_sta_mgt.o
  CC [M]  /root/rtl8812au/core/rtw_ap.o
  CC [M]  /root/rtl8812au/core/mesh/rtw_mesh.o
  CC [M]  /root/rtl8812au/core/mesh/rtw_mesh_pathtbl.o
  CC [M]  /root/rtl8812au/core/mesh/rtw_mesh_hwmp.o
  CC [M]  /root/rtl8812au/core/rtw_xmit.o
  CC [M]  /root/rtl8812au/core/rtw_p2p.o
  CC [M]  /root/rtl8812au/core/rtw_rson.o
  CC [M]  /root/rtl8812au/core/rtw_tdls.o
  CC [M]  /root/rtl8812au/core/rtw_br_ext.o
  CC [M]  /root/rtl8812au/core/rtw_iol.o
  CC [M]  /root/rtl8812au/core/rtw_sreset.o
  CC [M]  /root/rtl8812au/core/rtw_btcoex_wifionly.o
  CC [M]  /root/rtl8812au/core/rtw_btcoex.o
  CC [M]  /root/rtl8812au/core/rtw_beamforming.o
  CC [M]  /root/rtl8812au/core/rtw_odm.o
  CC [M]  /root/rtl8812au/core/rtw_rm.o
  CC [M]  /root/rtl8812au/core/rtw_rm_fsm.o
  CC [M]  /root/rtl8812au/core/efuse/rtw_efuse.o
  CC [M]  /root/rtl8812au/os_dep/osdep_service.o
  CC [M]  /root/rtl8812au/os_dep/linux/os_intfs.o
  CC [M]  /root/rtl8812au/os_dep/linux/usb_intf.o
  CC [M]  /root/rtl8812au/os_dep/linux/usb_ops_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/ioctl_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/xmit_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/mlme_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/recv_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/ioctl_cfg80211.o
  CC [M]  /root/rtl8812au/os_dep/linux/wifi_regd.o
  CC [M]  /root/rtl8812au/os_dep/linux/rtw_android.o
  CC [M]  /root/rtl8812au/os_dep/linux/rtw_proc.o
  CC [M]  /root/rtl8812au/os_dep/linux/rtw_rhashtable.o
  CC [M]  /root/rtl8812au/os_dep/linux/ioctl_mp.o
  CC [M]  /root/rtl8812au/hal/hal_intf.o
  CC [M]  /root/rtl8812au/hal/hal_com.o
  CC [M]  /root/rtl8812au/hal/hal_com_phycfg.o
  CC [M]  /root/rtl8812au/hal/hal_phy.o
  CC [M]  /root/rtl8812au/hal/hal_dm.o
  CC [M]  /root/rtl8812au/hal/hal_dm_acs.o
  CC [M]  /root/rtl8812au/hal/hal_btcoex_wifionly.o
  CC [M]  /root/rtl8812au/hal/hal_btcoex.o
  CC [M]  /root/rtl8812au/hal/hal_mp.o
  CC [M]  /root/rtl8812au/hal/hal_mcc.o
  CC [M]  /root/rtl8812au/hal/hal_hci/hal_usb.o
  CC [M]  /root/rtl8812au/hal/led/hal_led.o
  CC [M]  /root/rtl8812au/hal/led/hal_usb_led.o
  CC [M]  /root/rtl8812au/hal/HalPwrSeqCmd.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/Hal8812PwrSeq.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/Hal8821APwrSeq.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_sreset.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_hal_init.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_phycfg.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_rf6052.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_dm.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_rxdesc.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_cmd.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/usb_halinit.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/rtl8812au_led.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/rtl8812au_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/rtl8812au_recv.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/usb_ops_linux.o
  CC [M]  /root/rtl8812au/hal/efuse/rtl8812a/HalEfuseMask8812A_USB.o
  CC [M]  /root/rtl8812au/hal/efuse/rtl8812a/HalEfuseMask8821A_USB.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/hal8812a_fw.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/hal8821a_fw.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/Hal8814PwrSeq.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_sreset.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_hal_init.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_phycfg.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_rf6052.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_dm.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_rxdesc.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_cmd.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/hal8814a_fw.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/usb_halinit.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/rtl8814au_led.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/rtl8814au_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/rtl8814au_recv.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/usb_ops_linux.o
  CC [M]  /root/rtl8812au/hal/efuse/rtl8814a/HalEfuseMask8814A_USB.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_debug.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_antdiv.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_soml.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_smt_ant.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_antdect.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_interface.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_phystatus.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_hwconfig.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_dig.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_pathdiv.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_rainfo.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_dynamictxpower.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_adaptivity.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_cfotracking.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_noisemonitor.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_beamforming.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_dfs.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/halcomtxbf.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/haltxbfinterface.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/phydm_hal_txbf_api.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_adc_sampling.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_ccx.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_psd.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_primary_cca.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_cck_pd.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_rssi_monitor.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_auto_dbg.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_math_lib.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_api.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_pow_train.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_lna_sat.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_pmac_tx_setting.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_mp.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf.o
/root/rtl8812au/hal/phydm/halrf/halrf.c: In function ‘halrf_mode’:
/root/rtl8812au/hal/phydm/halrf/halrf.c:2394:1: warning: the frame size of 1624 bytes is larger than 1024 bytes [-Wframe-larger-than=]
 2394 | }
      | ^
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_debug.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halphyrf_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_powertracking_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_powertracking.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_kfree.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/halhwimg8812a_mac.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/halhwimg8812a_bb.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/halhwimg8812a_rf.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8812a/halrf_8812a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/phydm_regconfig8812a.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/phydm_rtl8812a.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/haltxbfjaguar.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/halhwimg8821a_mac.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/halhwimg8821a_bb.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/halhwimg8821a_rf.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8821a/halrf_8821a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/phydm_regconfig8821a.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/phydm_rtl8821a.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8821a/halrf_iqk_8821a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/halhwimg8814a_bb.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/halhwimg8814a_mac.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/halhwimg8814a_rf.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8814a/halrf_iqk_8814a.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/phydm_regconfig8814a.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8814a/halrf_8814a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/phydm_rtl8814a.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/haltxbf8814a.o
  CC [M]  /root/rtl8812au/platform/platform_ops.o
  CC [M]  /root/rtl8812au/core/rtw_mp.o
  LD [M]  /root/rtl8812au/88XXau.o
  MODPOST /root/rtl8812au/Module.symvers
  CC [M]  /root/rtl8812au/88XXau.mod.o
  LD [M]  /root/rtl8812au/88XXau.ko
---------------------------------------------------------------------------
Visit https://github.com/aircrack-ng/rtl8812au for support/reporting issues
or check for newer versions (branches) of these drivers.
---------------------------------------------------------------------------
install -p -m 644 88XXau.ko  /lib/modules/6.1.58-2-rpi-ARCH/kernel/drivers/net/wireless/
/sbin/depmod -a 6.1.58-2-rpi-ARCH
rAudio:~/rtl8812au  #
 

ibraino

Active Member
Với pi 2 trước e dùng airport express (đã mod nguồn) bắt wifi rồi cắm vô cổng lan cho pi 2. Mà chưa test thử tốc độ ra sao.
 

quatmo

Well-Known Member
Làm thẻ mới pass cùng lúc 11 dòng : RTL8812AU cài driver thàng công nhưng rAudio 32bit vẫn chưa thấy CF-917 bác Lâm ạ ( mò mẫm cho biết driver chú này khó chịu đến đâu ui ? ) . :D

sudo pacman -Syu (n)
sudo pacman -S linux-rpi-headers
sudo mv -f /usr/lib/modules/6.1.64-2-rpi-ARCH/build /usr/lib/modules/6.1.58-2-rpi-ARCH/
sudo pacman -S base-devel
sudo pacman -S bc
sudo pacman -S git
git clone https://github.com/aircrack-ng/rtl8812au.git
cd rtl8812au
git pull
make
sudo make install

Mã:
   r A u d i o


rAudio:~  #  sudo pacman -Syu
sudo pacman -S linux-rpi-headers
sudo mv -f /usr/lib/modules/6.1.64-2-rpi-ARCH/build /usr/lib/modules/6.1.58-2-rpi-ARCH/
sudo pacman -S base-devel
sudo pacman -S bc
sudo pacman -S git
git clone https://github.com/aircrack-ng/rtl8812au.git
cd rtl8812au
git pull
make
sudo make install
:: Synchronizing package databases...
 +R is up to date
 core is up to date
 extra                                                         8.9 MiB   621 KiB/s 00:15 [###################################################] 100%
 alarm is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...

Packages (102) archlinux-keyring-20231130-1  avahi-1:0.8+r189+g35bb1ba-1  bash-5.2.021-1  blas-3.12.0-2  c-ares-1.23.0-1
               ca-certificates-mozilla-3.95-1  cblas-3.12.0-2  dhcpcd-10.0.5-1  dialog-1:1.3_20231002-1  ffmpeg-2:6.1-1  firefox-120.0.1-1
               gawk-5.3.0-1  gettext-0.22.4-1  glib2-2.78.1-1  gnupg-2.4.3-2  gnutls-3.8.2-1  gpgme-1.23.2-1  gssproxy-0.9.2-1
               gtk-update-icon-cache-1:4.12.4-1  harfbuzz-8.3.0-1  hwdata-0.376-1  iana-etc-20231117-1  imagemagick-7.1.1.22-1  iproute2-6.6.0-2
               iptables-1:1.8.10-1  krb5-1.20.1-2  lapack-3.12.0-2  libass-0.17.1-2  libcap-2.69-3  libcloudproviders-0.3.5-1  libdrm-2.4.118-1
               libelf-0.190-1  libgcrypt-1.10.3-1  libjpeg-turbo-3.0.1-1  libksba-1.6.5-1  libnghttp2-1.58.0-1  libnpupnp-5.1.2-1  libnsl-2.0.1-1
               libp11-kit-0.25.3-1  libpipewire-1:1.0.0-2  libpulse-16.1-7  libsndfile-1.2.2-2  libsoup3-3.4.4-1  libsysprof-capture-45.1-1
               libtiff-4.6.0-2  libunibreak-5.1-1  libunwind-1.7.2-1  libupnpp-0.24.1-1  liburing-2.5-1  libuv-1.47.0-1  libwacom-2.9.0-2
               libwbclient-4.19.3-1  libwebsockets-4.3.3-1  libxml2-2.12.1-1  linux-firmware-20231110.74158e7a-1
               linux-firmware-whence-20231110.74158e7a-1  linux-rpi-6.1.64-2  mkinitcpio-37.1-1  mpd-0.23.14-2  nfs-utils-2.6.4-1
               nfsidmap-2.6.4-1  nftables-1:1.0.9-1  nginx-mainline-1.25.3-1  nss-3.95-1  openssl-3.1.4-1  p11-kit-0.25.3-1  pcsclite-2.0.1-1
               php-8.2.13-1  php-fpm-8.2.13-1  python-3.11.6-1  python-attrs-23.1.0-1  python-charset-normalizer-3.3.2-1
               python-jsonschema-4.20.0-1  python-jsonschema-specifications-2023.11.2-1  python-numpy-1.26.2-1  python-referencing-0.31.1-1
               python-upnpp-0.24.0-1  python-urllib3-1.26.18-1  qt5-base-5.15.11+kde+r147-1  raspberrypi-bootloader-20231129-1
               raspberrypi-utils-20231130-1  readline-8.2.007-1  samba-4.19.3-1  sdl2-2.28.5-1  shadow-4.14.2-1  shairport-sync-4.3.2-1
               shared-mime-info-2.4-1  smbclient-4.19.3-1  sqlite-3.44.2-2  sudo-1.9.15.p2-1  systemd-254.6-2  systemd-libs-254.6-2
               systemd-sysvcompat-254.6-2  upmpdcli-1.8.6-1  util-linux-2.39.2-2  util-linux-libs-2.39.2-2  vulkan-icd-loader-1.3.269-1
               xdg-utils-1.2.0r17+g21fb316-1  xorg-server-21.1.9-1  xorg-server-common-21.1.9-1  xz-5.4.5-1  zlib-1:1.3-2

Total Download Size:    313.56 MiB
Total Installed Size:  1338.16 MiB
Net Upgrade Size:        46.98 MiB

:: Proceed with installation? [Y/n] n
resolving dependencies...
looking for conflicting packages...

Packages (1) linux-rpi-headers-6.1.64-2

Total Download Size:    9.89 MiB
Total Installed Size:  52.54 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 linux-rpi-headers-6.1.64-2-armv7h                                         9.9 MiB  1491 KiB/s 00:07 [#############################################
(1/1) checking keys in keyring                                                                       [#############################################
(1/1) checking package integrity                                                                     [#############################################
(1/1) loading package files                                                                          [#############################################
(1/1) checking for file conflicts                                                                    [#############################################
(1/1) checking available disk space                                                                  [#############################################
:: Processing package changes...
(1/1) installing linux-rpi-headers                                                                   [#############################################
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating module dependencies...
resolving dependencies...
looking for conflicting packages...

Packages (18) autoconf-2.71-4  automake-1.16.5-2  bison-3.8.2-6  debugedit-5.0-5  fakeroot-1.32.2-1  flex-2.6.4-5  gc-8.2.4-1  gcc-12.1.0-2.1  grof
              guile-3.0.9-1  libisl-0.26-1  libmpc-1.3.1-1  m4-1.4.19-3  make-4.4.1-2  patch-2.7.6-10  pkgconf-2.0.3-1  texinfo-7.1-2  base-devel-1

Total Download Size:    44.00 MiB
Total Installed Size:  208.53 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 gcc-12.1.0-2.1-armv7h                                                    28.8 MiB   487 KiB/s 01:01 [#############################################
 guile-3.0.9-1-armv7h                                                      6.9 MiB   377 KiB/s 00:00 [############################################# guile-3.0.9-1-armv7h                                          7.0 MiB   276 KiB/s 00:26 [###################################################] 100% groff-1.23.0-5-armv7h                                         2.0 MiB   568 KiB/s 00:04 [###################################################] 100%
 texinfo-7.1-2-armv7h                                       1601.4 KiB   330 KiB/s 00:05 [###################################################] 100%
 libisl-0.26-1-armv7h                                       1186.2 KiB   306 KiB/s 00:04 [###################################################] 100%
 bison-3.8.2-6-armv7h                                        716.8 KiB   276 KiB/s 00:03 [###################################################] 100%
 autoconf-2.71-4-any                                         638.6 KiB   246 KiB/s 00:03 [###################################################] 100%
 automake-1.16.5-2-any                                       606.5 KiB   237 KiB/s 00:03 [###################################################] 100%
 make-4.4.1-2-armv7h                                         474.2 KiB   256 KiB/s 00:02 [###################################################] 100%
 flex-2.6.4-5-armv7h                                         281.3 KiB   180 KiB/s 00:02 [###################################################] 100%
 m4-1.4.19-3-armv7h                                          228.0 KiB  73.8 KiB/s 00:03 [###################################################] 100%
 gc-8.2.4-1-armv7h                                           214.4 KiB  83.1 KiB/s 00:03 [###################################################] 100%
 patch-2.7.6-10-armv7h                                        92.9 KiB  90.2 KiB/s 00:01 [###################################################] 100%
 fakeroot-1.32.2-1-armv7h                                     73.4 KiB  96.6 KiB/s 00:01 [###################################################] 100%
 libmpc-1.3.1-1-armv7h                                        73.0 KiB  57.5 KiB/s 00:01 [###################################################] 100%
 pkgconf-2.0.3-1-armv7h                                       53.9 KiB  53.4 KiB/s 00:01 [###################################################] 100%
 debugedit-5.0-5-armv7h                                       40.7 KiB  40.3 KiB/s 00:01 [###################################################] 100%
 base-devel-1-1-any                                            2.0 KiB  3.98 KiB/s 00:01 [###################################################] 100%
 Total (18/18)                                                44.0 MiB   357 KiB/s 02:06 [###################################################] 100%
(18/18) checking keys in keyring                                                         [###################################################] 100%
(18/18) checking package integrity                                                       [###################################################] 100%
(18/18) loading package files                                                            [###################################################] 100%
(18/18) checking for file conflicts                                                      [###################################################] 100%
(18/18) checking available disk space                                                    [###################################################] 100%
:: Processing package changes...
( 1/18) installing m4                                                                    [###################################################] 100%
( 2/18) installing autoconf                                                              [###################################################] 100%
( 3/18) installing automake                                                              [###################################################] 100%
( 4/18) installing bison                                                                 [###################################################] 100%
( 5/18) installing debugedit                                                             [###################################################] 100%
( 6/18) installing fakeroot                                                              [###################################################] 100%
( 7/18) installing flex                                                                  [###################################################] 100%
( 8/18) installing libmpc                                                                [###################################################] 100%
( 9/18) installing libisl                                                                [###################################################] 100%
(10/18) installing gcc                                                                   [###################################################] 100%
(11/18) installing groff                                                                 [###################################################] 100%
Optional dependencies for groff
    netpbm: for use together with man -H command interaction in browsers
    psutils: for use together with man -H command interaction in browsers
    libxaw: for gxditview
    perl-file-homedir: for use with glilypond
(12/18) installing gc                                                                    [###################################################] 100%
(13/18) installing guile                                                                 [###################################################] 100%
(14/18) installing make                                                                  [###################################################] 100%
(15/18) installing patch                                                                 [###################################################] 100%
Optional dependencies for patch
    ed: for patch -e functionality
(16/18) installing pkgconf                                                               [###################################################] 100%
(17/18) installing texinfo                                                               [###################################################] 100%
Optional dependencies for texinfo
    perl-archive-zip: EPUB file output via texi2any
(18/18) installing base-devel                                                            [###################################################] 100%
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating the info directory file...
resolving dependencies...
looking for conflicting packages...

Packages (1) bc-1.07.1-4

Total Download Size:   0.08 MiB
Total Installed Size:  0.15 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 bc-1.07.1-4-armv7h                                           78.4 KiB  49.6 KiB/s 00:02 [###################################################] 100%
(1/1) checking keys in keyring                                                           [###################################################] 100%
(1/1) checking package integrity                                                         [###################################################] 100%
(1/1) loading package files                                                              [###################################################] 100%
(1/1) checking for file conflicts                                                        [###################################################] 100%
(1/1) checking available disk space                                                      [###################################################] 100%
:: Processing package changes...
(1/1) installing bc                                                                      [###################################################] 100%
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating the info directory file...
resolving dependencies...
looking for conflicting packages...

Packages (4) perl-error-0.17029-5  perl-mailtools-2.21-7  perl-timedate-2.33-5  git-2.43.0-1

Total Download Size:    6.09 MiB
Total Installed Size:  37.72 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 git-2.43.0-1-armv7h                                           6.0 MiB   298 KiB/s 00:21 [###################################################] 100%
 perl-mailtools-2.21-7-any                                    58.5 KiB  46.1 KiB/s 00:01 [###################################################] 100%
 perl-timedate-2.33-5-any                                     32.9 KiB  43.3 KiB/s 00:01 [###################################################] 100%
 perl-error-0.17029-5-any                                     21.0 KiB  40.4 KiB/s 00:01 [###################################################] 100%
 Total (4/4)                                                   6.1 MiB   258 KiB/s 00:24 [###################################################] 100%
(4/4) checking keys in keyring                                                           [###################################################] 100%
(4/4) checking package integrity                                                         [###################################################] 100%
(4/4) loading package files                                                              [###################################################] 100%
(4/4) checking for file conflicts                                                        [###################################################] 100%
(4/4) checking available disk space                                                      [###################################################] 100%
:: Processing package changes...
(1/4) installing perl-error                                                              [###################################################] 100%
(2/4) installing perl-timedate                                                           [###################################################] 100%
(3/4) installing perl-mailtools                                                          [###################################################] 100%
(4/4) installing git                                                                     [###################################################] 100%
Optional dependencies for git
    tk: gitk and git gui
    openssh: ssh transport and crypto [installed]
    perl-libwww: git svn
    perl-term-readkey: git svn and interactive.singlekey setting
    perl-io-socket-ssl: git send-email TLS support [installed]
    perl-authen-sasl: git send-email TLS support
    perl-mediawiki-api: git mediawiki support
    perl-datetime-format-iso8601: git mediawiki support
    perl-lwp-protocol-https: git mediawiki https support
    perl-cgi: gitweb (web interface) support
    python: git svn & git p4 [installed]
    subversion: git svn
    org.freedesktop.secrets: keyring credential helper
    libsecret: libsecret credential helper [installed]
:: Running post-transaction hooks...
(1/4) Creating system user accounts...
Creating group 'git' with GID 961.
Creating user 'git' (git daemon user) with UID 961 and GID 961.
(2/4) Reloading system manager configuration...
(3/4) Arming ConditionNeedsUpdate...
(4/4) Warn about old perl modules
Cloning into 'rtl8812au'...
remote: Enumerating objects: 11222, done.
remote: Counting objects: 100% (1116/1116), done.
remote: Compressing objects: 100% (675/675), done.
remote: Total 11222 (delta 525), reused 893 (delta 422), pack-reused 10106
Receiving objects: 100% (11222/11222), 71.89 MiB | 1.99 MiB/s, done.
Resolving deltas: 100% (7493/7493), done.
Updating files: 100% (578/578), done.
Already up to date.
make ARCH=arm CROSS_COMPILE= -C /lib/modules/6.1.58-2-rpi-ARCH/build M=/root/rtl8812au  modules
warning: the compiler differs from the one used to build the kernel
  The kernel was built by: armv7l-unknown-linux-gnueabihf-gcc (GCC) 12.1.0
  You are using:           gcc (GCC) 12.1.0
  CC [M]  /root/rtl8812au/core/rtw_cmd.o
  CC [M]  /root/rtl8812au/core/rtw_security.o
  CC [M]  /root/rtl8812au/core/rtw_debug.o
  CC [M]  /root/rtl8812au/core/rtw_io.o
  CC [M]  /root/rtl8812au/core/rtw_ioctl_query.o
  CC [M]  /root/rtl8812au/core/rtw_ioctl_set.o
  CC [M]  /root/rtl8812au/core/rtw_ieee80211.o
  CC [M]  /root/rtl8812au/core/rtw_mlme.o
  CC [M]  /root/rtl8812au/core/rtw_mlme_ext.o
  CC [M]  /root/rtl8812au/core/rtw_mi.o
  CC [M]  /root/rtl8812au/core/rtw_wlan_util.o
  CC [M]  /root/rtl8812au/core/rtw_vht.o
  CC [M]  /root/rtl8812au/core/rtw_pwrctrl.o
  CC [M]  /root/rtl8812au/core/rtw_rf.o
  CC [M]  /root/rtl8812au/core/rtw_chplan.o
  CC [M]  /root/rtl8812au/core/rtw_recv.o
  CC [M]  /root/rtl8812au/core/rtw_sta_mgt.o
  CC [M]  /root/rtl8812au/core/rtw_ap.o
  CC [M]  /root/rtl8812au/core/mesh/rtw_mesh.o
  CC [M]  /root/rtl8812au/core/mesh/rtw_mesh_pathtbl.o
  CC [M]  /root/rtl8812au/core/mesh/rtw_mesh_hwmp.o
  CC [M]  /root/rtl8812au/core/rtw_xmit.o
  CC [M]  /root/rtl8812au/core/rtw_p2p.o
  CC [M]  /root/rtl8812au/core/rtw_rson.o
  CC [M]  /root/rtl8812au/core/rtw_tdls.o
  CC [M]  /root/rtl8812au/core/rtw_br_ext.o
  CC [M]  /root/rtl8812au/core/rtw_iol.o
  CC [M]  /root/rtl8812au/core/rtw_sreset.o
  CC [M]  /root/rtl8812au/core/rtw_btcoex_wifionly.o
  CC [M]  /root/rtl8812au/core/rtw_btcoex.o
  CC [M]  /root/rtl8812au/core/rtw_beamforming.o
  CC [M]  /root/rtl8812au/core/rtw_odm.o
  CC [M]  /root/rtl8812au/core/rtw_rm.o
  CC [M]  /root/rtl8812au/core/rtw_rm_fsm.o
  CC [M]  /root/rtl8812au/core/efuse/rtw_efuse.o
  CC [M]  /root/rtl8812au/os_dep/osdep_service.o
  CC [M]  /root/rtl8812au/os_dep/linux/os_intfs.o
  CC [M]  /root/rtl8812au/os_dep/linux/usb_intf.o
  CC [M]  /root/rtl8812au/os_dep/linux/usb_ops_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/ioctl_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/xmit_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/mlme_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/recv_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/ioctl_cfg80211.o
  CC [M]  /root/rtl8812au/os_dep/linux/wifi_regd.o
  CC [M]  /root/rtl8812au/os_dep/linux/rtw_android.o
  CC [M]  /root/rtl8812au/os_dep/linux/rtw_proc.o
  CC [M]  /root/rtl8812au/os_dep/linux/rtw_rhashtable.o
  CC [M]  /root/rtl8812au/os_dep/linux/ioctl_mp.o
  CC [M]  /root/rtl8812au/hal/hal_intf.o
  CC [M]  /root/rtl8812au/hal/hal_com.o
  CC [M]  /root/rtl8812au/hal/hal_com_phycfg.o
  CC [M]  /root/rtl8812au/hal/hal_phy.o
  CC [M]  /root/rtl8812au/hal/hal_dm.o
  CC [M]  /root/rtl8812au/hal/hal_dm_acs.o
  CC [M]  /root/rtl8812au/hal/hal_btcoex_wifionly.o
  CC [M]  /root/rtl8812au/hal/hal_btcoex.o
  CC [M]  /root/rtl8812au/hal/hal_mp.o
  CC [M]  /root/rtl8812au/hal/hal_mcc.o
  CC [M]  /root/rtl8812au/hal/hal_hci/hal_usb.o
  CC [M]  /root/rtl8812au/hal/led/hal_led.o
  CC [M]  /root/rtl8812au/hal/led/hal_usb_led.o
  CC [M]  /root/rtl8812au/hal/HalPwrSeqCmd.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/Hal8812PwrSeq.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/Hal8821APwrSeq.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_sreset.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_hal_init.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_phycfg.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_rf6052.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_dm.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_rxdesc.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_cmd.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/usb_halinit.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/rtl8812au_led.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/rtl8812au_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/rtl8812au_recv.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/usb_ops_linux.o
  CC [M]  /root/rtl8812au/hal/efuse/rtl8812a/HalEfuseMask8812A_USB.o
  CC [M]  /root/rtl8812au/hal/efuse/rtl8812a/HalEfuseMask8821A_USB.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/hal8812a_fw.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/hal8821a_fw.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/Hal8814PwrSeq.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_sreset.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_hal_init.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_phycfg.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_rf6052.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_dm.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_rxdesc.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_cmd.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/hal8814a_fw.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/usb_halinit.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/rtl8814au_led.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/rtl8814au_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/rtl8814au_recv.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/usb_ops_linux.o
  CC [M]  /root/rtl8812au/hal/efuse/rtl8814a/HalEfuseMask8814A_USB.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_debug.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_antdiv.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_soml.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_smt_ant.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_antdect.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_interface.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_phystatus.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_hwconfig.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_dig.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_pathdiv.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_rainfo.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_dynamictxpower.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_adaptivity.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_cfotracking.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_noisemonitor.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_beamforming.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_dfs.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/halcomtxbf.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/haltxbfinterface.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/phydm_hal_txbf_api.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_adc_sampling.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_ccx.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_psd.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_primary_cca.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_cck_pd.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_rssi_monitor.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_auto_dbg.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_math_lib.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_api.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_pow_train.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_lna_sat.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_pmac_tx_setting.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_mp.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf.o
/root/rtl8812au/hal/phydm/halrf/halrf.c: In function ‘halrf_mode’:
/root/rtl8812au/hal/phydm/halrf/halrf.c:2394:1: warning: the frame size of 1624 bytes is larger than 1024 bytes [-Wframe-larger-than=]
 2394 | }
      | ^
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_debug.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halphyrf_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_powertracking_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_powertracking.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_kfree.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/halhwimg8812a_mac.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/halhwimg8812a_bb.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/halhwimg8812a_rf.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8812a/halrf_8812a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/phydm_regconfig8812a.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/phydm_rtl8812a.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/haltxbfjaguar.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/halhwimg8821a_mac.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/halhwimg8821a_bb.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/halhwimg8821a_rf.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8821a/halrf_8821a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/phydm_regconfig8821a.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/phydm_rtl8821a.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8821a/halrf_iqk_8821a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/halhwimg8814a_bb.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/halhwimg8814a_mac.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/halhwimg8814a_rf.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8814a/halrf_iqk_8814a.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/phydm_regconfig8814a.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8814a/halrf_8814a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/phydm_rtl8814a.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/haltxbf8814a.o
  CC [M]  /root/rtl8812au/platform/platform_ops.o
  CC [M]  /root/rtl8812au/core/rtw_mp.o
  LD [M]  /root/rtl8812au/88XXau.o
  MODPOST /root/rtl8812au/Module.symvers
  CC [M]  /root/rtl8812au/88XXau.mod.o
  LD [M]  /root/rtl8812au/88XXau.ko
---------------------------------------------------------------------------
Visit https://github.com/aircrack-ng/rtl8812au for support/reporting issues
or check for newer versions (branches) of these drivers.
---------------------------------------------------------------------------
install -p -m 644 88XXau.ko  /lib/modules/6.1.58-2-rpi-ARCH/kernel/drivers/net/wireless/
/sbin/depmod -a 6.1.58-2-rpi-ARCH
rAudio:~/rtl8812au  #
Anh thử chạy thêm dòng này xem có hiện gì và reboot lại

Trang tài liệu thông tin về USB wifi rất hay: https://github.com/morrownr/USB-WiFi/

sudo modprobe 88XXau

--------------------------
Lời khuyên của bác morrownr dành cho việc mua và sử dụng USB Wifi trên Linux: https://github.com/morrownr/USB-WiF...Fi_Adapter_out-of-kernel_drivers_for_Linux.md

Trích dẫn của tác giả:

Lời khuyên của tôi, đối với những người dùng Linux cần mua bộ điều hợp mới, là hãy ưu tiên các bộ điều hợp dựa trên chipset Mediatek vì trình điều khiển Mediatek dựa trên Tiêu chuẩn Không dây Linux (mac80211) và được duy trì trong kernel. Điều này làm cho các bộ điều hợp dựa trên Mediatek trở nên ít rắc rối hơn về lâu dài.
--------

Nếu bạn không thể tìm thấy bộ điều hợp dựa trên chipset Mediatek thì tôi khuyên bạn nên sử dụng bộ điều hợp dựa trên chipset sau: 8812bu. Hiện tại, tôi khuyên bạn nên TRÁNH bộ điều hợp dựa trên chipset Realtek 8814au, 8832au và 8852au vì trình điều khiển không tốt và tôi cũng khuyên bạn TRÁNH bộ điều hợp đa trạng thái và đa chức năng (wifi và bt).
 
Chỉnh sửa lần cuối:

linh0983

Well-Known Member
Anh thử chạy thêm dòng này xem có hiện gì và reboot lại

Trang tài liệu thông tin về USB wifi rất hay: https://github.com/morrownr/USB-WiFi/

sudo modprobe 88XXau

--------------------------
Lời khuyên của bác morrownr dành cho việc mua và sử dụng USB Wifi trên Linux: https://github.com/morrownr/USB-WiF...Fi_Adapter_out-of-kernel_drivers_for_Linux.md

Trích dẫn của tác giả:

Lời khuyên của tôi, đối với những người dùng Linux cần mua bộ điều hợp mới, là hãy ưu tiên các bộ điều hợp dựa trên chipset Mediatek vì trình điều khiển Mediatek dựa trên Tiêu chuẩn Không dây Linux (mac80211) và được duy trì trong kernel. Điều này làm cho các bộ điều hợp dựa trên Mediatek trở nên ít rắc rối hơn về lâu dài.
--------

Nếu bạn không thể tìm thấy bộ điều hợp dựa trên chipset Mediatek thì tôi khuyên bạn nên sử dụng bộ điều hợp dựa trên chipset sau: 8812bu. Hiện tại, tôi khuyên bạn nên TRÁNH bộ điều hợp dựa trên chipset Realtek 8814au, 8832au và 8852au vì trình điều khiển không tốt và tôi cũng khuyên bạn TRÁNH bộ điều hợp đa trạng thái và đa chức năng (wifi và bt).
Lời khuyên rất hay xem khi về chú COMFAST CF-812ACv2 (RTL8812BU) có được ko ? :eek:

VBGF03.jpg


Sáng nay tôi đi lấy cục biến thế đây ui . . . :p
 

nqn_vnn

Well-Known Member
Em lỡ xoá file raudio cho pi2 pi3 của Bác quatmo, kiếm hoài ko thấy link cũ đâu... Bác nào share lại link em down với ạ. Thanks các Bác
 

nqn_vnn

Well-Known Member
rAudioLMS Pi 2-3 đã xong.
Sử dụng thuận tiện chuyển qua lại rAudio-LMS.

Nếu đang là rAudio, bấm vào logo góc trái sẽ mở ra LMS.

Đang là LMS bấm vào menu phải trên để truy cập rAudio hoặc truy cập Nas nhà mở nhạc đến rAudio. Bấm mũi tên back trái là quay lai LMS ngay.





01.png


03.png

04.png



05.png


Đang ghi IMG/Upload, khi nào xong mình add link vào đây.
Bản này cho Pi2, Pi3 nên mình build LMS 32bit trong ArchLinux, để cho nhẹ máy.

Cập nhật link:
link bị xoá, Bác reup giúp em với ạ :( . Thanks Bác :)
 

toi511

Well-Known Member
Anh @quatmo làm sao set ip tĩnh cho raudio anh. Ông anh xài không rành mà nó cứ đổi ip liên tục ông không vô được. Thanks anh
 
Bên trên